home *** CD-ROM | disk | FTP | other *** search
- 1000 Welcome to a new dimension in interactive multimedia.
- 1001 The EDGE 3D Multimedia Accelerator delivers an
- 1002 unprecedented interactive experience under Windows 95.
- 1003 This breakthrough product delivers the power of real-time
- 1004 photorealistic 3D graphics, video-based special effects,
- 1005 full-motion video acceleration, concurrent high-fidelity
- 1006 wavetable audio, and a digital game port. The EDGE 3D
- 1007 product delivers advanced arcade-level games thatwill
- 1008 transform your PC into the ultimate multimedia machine.
- 1009 The EDGE 3D represents the latest in multimedia technology
- 1010 and is fully compliant with PCI specifications.
- 1012
- 1013 Thank you for purchasing the EDGE 3D multimedia
- 1014 accelerator from Diamond Multimedia Systems. We
- 1015 appreciate you as a customer and we hope you enjoy
- 1016 playing your new PC games.
- 1040 The Diamond System Check Wizard will now check
- 1041 your system for full PCI compliance and compatibility
- 1042 with the multimedia technology contained within
- 1043 your EDGE 3D accelerator
- 1044
- 1045 While detection is in progress, you will see a
- 1046 progress indicator. If this indicator stops for a
- 1047 long time, you will need to restart your system.
- 1048
- 1049 To continue, click Next.
- 1080 Test Results:
- 1081
- 1082
- 1083
- 1084
- 1085
- 1086
- 1200 SysChk95 has now completed testing your system.
- 1201
- 1202 No known PCI compliance issues were found. You may
- 1203 Proceed with installation.
- 1204
- 1206 SysChk95 has now completed testing your system.
- 1207
- 1208 Problems which may require system modifications
- 1209 were found. Please correct them before proceeding
- 1210 with installation.
- 1211
- 1212 Use the back button to review the results of
- 1215 of the system check and the suggestions for
- 1216 fixing these problems.
- 1282 Diamond EDGE 3D System Check Wizard - Welcome
- 1283 Diamond EDGE 3D System Check Wizard
- 1284 Diamond EDGE 3D System Check Wizard
- 1285 Diamond EDGE 3D System Check Wizard
- 1286 Diamond EDGE 3D System Check Wizard
- 1287 Diamond EDGE 3D System Check Wizard
- 1400 SysChk95 has detected a Compaq Presario or Prolinea
- 1401 Computer with a BIOS date of 03/01/95 or earlier.
- 1402 To ensure correct PCI initialization, contact Compaq
- 1403 for a BIOS upgrade or refer to the EDGE 3D Installation
- 1404 Guide.\n\n
- 1410 The system BIOS does not support the EDGE 3D Multimedia
- 1411 Accelerator. Please contact your motherboard manufacturer
- 1412 for a BIOS upgrade (MR BIOS V3.22 or later).\n\n
- 1420 SysChk95 found AMI BIOS with a date of 3/1/95.\n\n
- 1430 SysChk95 found AST BIOS version 1.04. \n\n
- 1440 SysChk95 found Award BIOS dated January 1995 or ealier.\n\n
- 1450 SysChk95 found Phoenix BIOS version 4.02.\n\n
- 1460 SysChk95 found Phoenix BIOS version 1.0x.\n\n
- 1470 Please do not put the EDGE 3D card into your PC until you
- 1471 have upgraded your PCI system BIOS.\n\n
- 1480 This BIOS may not automatically assign interrupts
- 1481 or correctly enable the EDGE 3D Multimedia
- 1482 Accelerator or other peripherals. You should ensure
- 1483 that the PCI configuration options available under
- 1484 the system BIOS setup program set interrupts correctly.
- 1485 Press the appropriate key (typically F1, F2 or DEL)
- 1486 to enter the setup program after the memory test during
- 1487 system boot. Follow the on-screen instructions to select
- 1488 the PCI configuration menu. Set interrupts to LEVEL and
- 1489 assign an unused interrupt (typically 9, 10, or 11) to the
- 1490 slot containing the EDGE 3D PCI card.\n\n
- 1491 Note:\n\n
- 1492 Automatic PCI interrupt assignment, adopted as a default
- 1493 by system manufacturers, may generate conflicts between
- 1494 ISA and PCI interrupts. You should manually set ISA card
- 1495 interrupt values to non-conflicting values by observing
- 1496 which interrupt has been assigned to the EDGE 3D card.\n\n
- 1500 This BIOS does not support the multifunction portion of
- 1501 the PCI specification. Contact your PC or motherboard
- 1502 manufacturer for a fully compliant system BIOS upgrade
- 1503 before installing your Multimedia Accelerator.\n\n
- 1510 The system BIOS does not support multifunction cards
- 1511 correctly; therefore the EDGE 3D Multimedia card will
- 1512 not work in this system. Please contact the manufacturer
- 1513 of your motherboard for a BIOS upgrade.\n\n
- 1520 This chipset has an onboard IDE controller, with a
- 1521 multiplexed address bus, which will cause degradation
- 1522 in graphics and audio performance. For improved performance
- 1523 use an ISA IDE controller card and disable the onboard
- 1524 IDE controller.\n\n
- 1530 A PCI-PCI bridge was found. For best performance, the EDGE
- 1531 3D Multimedia Accelerator card should be located on the
- 1532 primary PCI bus. See your hardware documentation to determine
- 1533 which slots are on the primary PCI bus.\n\n
- 1540 Your system BIOS may not support all interrupt configurations.
- 1541 We suggest you reserve IRQ 9 for the EDGE 3D Multimedia
- 1542 Accelerator, and set other peripherals to use other available
- 1543 interrupts.\n\n
- 1550 SysChk95 found an Intel Aries PCI bridge chip.\n\n
- 1561 SysChk95 found an Intel Mercury PCI bridge chip.\n\n
- 1570 SysChk95 found an Intel Triton PCI bridge chip.\n\n
- 1580 SysChk95 found SIS 496 PCI bridge chip.\n\n
- 1590 SysChk95 found OPTi 822 PCI bridge chip.\n\n
- 1600 SysChk95 found OPTi 558 PCI bridge chip.\n\n
- 1610 The default Windows 95 VGA.DRV driver could create system
- 1611 conflicts. Please restart the computer in MSDOS mode and
- 1612 copy VGA.DRV from the EDGE 3D CDROM into your Windows 95
- 1613 system directory (e.g. /WINDOWS/SYSTEM) before installing the
- 1614 EDGE 3D card.\n\n
- 1620 This chipset has an onboard IDE controller, with a multiplexed
- 1621 address bus, which will cause degradation in graphics and audio
- 1622 performance. For improved performance use an ISA IDE controller
- 1623 card and disable the onboard IDE controller.\n\n
- 1630 SysChk95 could not find a PCI BIOS.\n\n
- 1640 SysChk95 has found a problem which may require system modifications.
- 1641 Please correct before proceeding with installation.\n\n
- 1650 SysChk95 has found no known PCI compliance issues. Proceed with
- 1651 installation. \n\n
- 61440 Open
- 61441 Save As
- 61442 All Files (*.*)
- 61443 Untitled
- 61696 Invalid filename.
- 61697 Failed to open document.
- 61698 Failed to save document.
- 61699 Save changes to %1?
- 61700 Failed to create empty document.
- 61701 The file is too large to open.
- 61702 Could not start print job.
- 61703 Failed to launch help.
- 61704 Internal application error.
- 61705 Command failed.
- 61706 Insufficient memory to perform operation.
- 61712 Please enter an integer.
- 61713 Please enter a number.
- 61714 Please enter an integer between %1 and %2.
- 61715 Please enter a number between %1 and %2.
- 61716 Please enter no more than %1 characters.
- 61717 Please select a button.
- 61718 Please enter an integer between 0 and 255.
- 61719 Please enter a positive integer.
- 61728 Unexpected file format.
- 61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
- 61730 Destination disk drive is full.
- 61731 Unable to read from %1, it is opened by someone else.
- 61732 Unable to write to %1, it is read-only or opened by someone else.
- 61733 An unexpected error occurred while reading %1.
- 61734 An unexpected error occurred while writing %1.
- 61836 Unable to read write-only property.
- 61837 Unable to write read-only property.
- 61840 Unable to load mail system support.
- 61841 Mail system DLL is invalid.
- 61842 Send Mail failed to send message.
- 61984 OK\n50
- 61985 Cancel\n50
- 61986 &Apply\n50
- 61987 &Help\n50
- 61988 Close
-